9ZR-11 cutting (kneading) machine
This product is powered by motor. The power is conveyed to the main shaft. The gear on the other end of the main shaft transmits the sped-adjusted power to the straw pressing roller via gearbox, universal joint and chain. When materials to be processed enter into the space between the upper straw pressing roller and the lower straw pressing roller via the conveying belt, they will be fed into the cutting mechanism at a certain speed for cut-up, kneaded by a kneading mechanism that revolves at a high speed and then thrown out of the machine via the discharge port by the fan blade.
Classification:
Key words:
9ZR-11 cutting (kneading) machine
- Product details
- Product video
-
- Commodity name: 9ZR-11 cutting (kneading) machine
This product is powered by motor. The power is conveyed to the main shaft. The gear on the other end of the main shaft transmits the sped-adjusted power to the straw pressing roller via gearbox, universal joint and chain. When materials to be processed enter into the space between the upper straw pressing roller and the lower straw pressing roller via the conveying belt, they will be fed into the cutting mechanism at a certain speed for cut-up, kneaded by a kneading mechanism that revolves at a high speed and then thrown out of the machine via the discharge port by the fan blade.
Main technical parameters:
Specification and model
9ZR-11 Cutting (kneading) machine
Power
Motor
Power (kW)
30
Revolving speed (r/min)
1,440
Overall dimensions
Transport: length×width×height (mm)
2,540 × 1,700 × 1,700
Use: length×width×height (mm)
3,220 × 2,600 × 2,135
Structural form
Straw cutting and kneading type
Rated revolving speed of the main shaft (r/min)
800
Number of blades (pcs.)
2
Quantity of hammer (pcs.)
28
Hammer dimensions: (length×width×height) (mm)
180 × 50 × 5
Rotor working diameter (mm)
φ1,300
Machine quality (kg)
850
Rotor diameter (without hammer)
φ1,300
Feed mode
Axial automatic feed
Rotor width
260
Transmission type
Belt transmission
V-belt
Five B1800 belts
Cutting mechanism form
Cutter holder type
Kneading mechanism mode
Hammer teeth plate kneading type
Rotor mass (kg)
95.5
Performance indicators:
Item
Data
Productivity
(straw cutting length is 16 mm under continuous even feed)
Green corn stalks (water content 78%)
≥11 t/h
Straw cutting length
2 pieces of movable cutters
18, 27, 37, 52 (mm)
Finished material purging distance
7–14 (m)
Working principle:
This product is powered by motor. The power is conveyed to the main shaft. The gear on the other end of the main shaft transmits the sped-adjusted power to the straw pressing roller via gearbox, universal joint and chain. When materials to be processed enter into the space between the upper straw pressing roller and the lower straw pressing roller via the conveying belt, they will be fed into the cutting mechanism at a certain speed for cut-up, kneaded by a kneading mechanism that revolves at a high speed and then thrown out of the machine via the discharge port by the fan blade.
online message
Contact Information
Address: 500 m west of the intersection of Huanghe Avenue and Longma Road, Chengguan Town, Mengjin District, Luoyang City, Henan Province
Service Hotline: 86-0379-67913226
Fax: +86-0379-67921908
Office: +86-0379-67917531
Technical Department: +86-0379-67922905
Mailbox:sdnjyxb@163.com
WeChat Consulting
Mobile end