9RC-100 straw kneading machine
This product is powered by motor. The power is conveyed to the main shaft. The gear on the other end of the main shaft transmits the sped-adjusted power to the straw pressing roller via gearbox, universal joint and chain. When materials to be processed enter into the space between the upper straw pressing roller and the lower straw pressing roller via the conveying belt, they will be fed into the cutting mechanism at a certain speed for cut-up, kneaded by a kneading mechanism that revolves at a high speed and then thrown out of the machine via the discharge port by the fan blade.
Classification:
Key words:
9RC-100 straw kneading machine
- Product details
- Product video
-
- Commodity name: 9RC-100 straw kneading machine
This product is powered by motor. The power is conveyed to the main shaft. The gear on the other end of the main shaft transmits the sped-adjusted power to the straw pressing roller via gearbox, universal joint and chain. When materials to be processed enter into the space between the upper straw pressing roller and the lower straw pressing roller via the conveying belt, they will be fed into the cutting mechanism at a certain speed for cut-up, kneaded by a kneading mechanism that revolves at a high speed and then thrown out of the machine via the discharge port by the fan blade.
Item
9RC-100 Straw Kneading Machine
Power
Motor
Rated power (kW)
18.5
Rated revolving speed (r/min)
1,470
Overall dimensions
Transport: (length×width×height) (mm)
1,280 × 1,070 × 1,585
Use: (length×width×height) (mm)
2,430 × 2,200 × 2,756
Structural form
Straw cutting and kneading type
Machine quality (kg)
580
Rated revolving speed of the main shaft (r/min)
650 (1,200)
Productivity (kg/h)
≥6,000
Rotor diameter (without hammer blades) (mm)
1,000
Rotor width (mm)
305
Rotor working diameter (mm)
1,000
Quantity of hammer
24
Feed mode
Automatic feed
Quantity of blade
2 pieces
Cutting mechanism form (if applicable)
Cutter holder type
Kneading mechanism form (if applicable)
Hammer type
Transmission type
Belt transmission
Item
Data
Productivity
(Straw cutting length is 16 mm under continuous even feed)
Green corn stalks (water content 78%)
≥6 t/h
Dry corn stalks (water content 17%)
≥2 t/h
Dry straw (water content 17%)
≥2 t/h
Dry wheat straw (water content 17%)
≥1.5 t/h
Dry alfalfa (water content 20%)
≥2.5 t/h
Straw cutting length
2 pieces of movable cutters
18, 27, 37, 52 (mm)
Finished material purging distance
5–8 (m)
Working principle
This product is powered by motor. The power is conveyed to the main shaft. The gear on the other end of the main shaft transmits the sped-adjusted power to the straw pressing roller via gearbox, universal joint and chain. When materials to be processed enter into the space between the upper straw pressing roller and the lower straw pressing roller via the conveying belt, they will be fed into the cutting mechanism at a certain speed for cut-up, kneaded by a kneading mechanism that revolves at a high speed and then thrown out of the machine via the discharge port by the fan blade.
Scope of application
Sida 9RC-100 straw kneading machine is suitable for kneading many kinds of crop straws and pastures such as corn stalks, bean stalks, cotton stalks, etc. By kneading materials into soft strands with even notches and without hard knots, the grazing rate, eating-up rate and digestibility of livestock can be improved. It is suitable for pastures and professional breeding families, and can be used as the raw material of papermaking by grinding.
-
online message
Contact Information
Address: 500 m west of the intersection of Huanghe Avenue and Longma Road, Chengguan Town, Mengjin District, Luoyang City, Henan Province
Service Hotline: 86-0379-67913226
Fax: +86-0379-67921908
Office: +86-0379-67917531
Technical Department: +86-0379-67922905
Mailbox:sdnjyxb@163.com
WeChat Consulting
Mobile end