PRODUCTS CENTER

PRODUCTS CENTER

5T-90 maneuverable thresher

This product is powered by motor or diesel engine. V-belt transmits power to cylinder. The cylinder that rotates at a high speed and the grid type notch board work together to separate kernels, bran and straw in materials. Separated straw is discharged from the discharge port. Kernels and bran enter into the cleaning and selection mechanism. Under the action of the induced draft fan, bran is discharged out of the discharge port of the fan. Kernels fall onto the vibrating screen for secondary vibration before discharge, achieving a good cleaning and selection effect.

More

9Z-4C silage cutter

This product is powered by motor (diesel engine or roller tractor). The power is conveyed to the main shaft. The driving V-belt on the other end of the main shaft transmits the sped-adjusted power to the straw pressing roller via triangle belt, clutch wheel, gearbox, universal joint and chain. When materials to be processed enter into the space between the upper straw pressing roller and the lower straw pressing roller, they will be clamped by the straw rollers and fed into the cutting mechanism at a certain speed, and then thrown out of the machine via the discharge port after being cut up by the revolving cutter holder at a high speed.

More

9Z-6.5 silage cutter

This product is powered by motor (diesel engine or roller tractor). The power is conveyed to the main shaft. The driving V-belt on the other end of the main shaft transmits the sped-adjusted power to the straw pressing roller via triangle belt, clutch wheel, gearbox, universal joint and chain. When materials to be processed enter into the space between the upper straw pressing roller and the lower straw pressing roller, they will be clamped by the straw rollers and fed into the cutting mechanism at a certain speed, and then thrown out of the machine via the discharge port after being cut up by the revolving cutter holder at a high speed.

More

9Z-9.5 silage cutter

This product is powered by motor (diesel engine or roller tractor). The power is conveyed to the main shaft. The driving V-belt on the other end of the main shaft transmits the sped-adjusted power to the straw pressing roller via triangle belt, clutch wheel, gearbox, universal joint and chain. When materials to be processed enter into the space between the upper straw pressing roller and the lower straw pressing roller, they will be clamped by the straw rollers and fed into the cutting mechanism at a certain speed, and then thrown out of the machine via the discharge port after being cut up by the revolving cutter holder at a high speed.

More

9Z-13 silage cutter

9Z-13 silage cutter is composed of feeding mechanism, cutting and throwing mechanism, transmission mechanism, walking mechanism, protective device and rack. It is characterized by reasonable structure, convenient movement, automatic feeding, safety and reliability.

More

9G-1.25 mower

9G-1.25 mower is a forward mounting machine used in conjunction with 8.8 KW–30 KW four-wheel tractors. Its header is hydraulic lifting and the cutter is of rotary type. This set of machinery is characterized by compact structure, flexible operation, and reliable use, mainly used for harvesting grass in various plots of dry grasslands.

More

9FQ-36 feed grinder

Feed grinder consists of the feeding table, grinding chamber, rack, fan and discharge pipe. It is characterized by reasonable structure, convenient movement, safety and reliability.

More

9FQ-45B feed grinder

Feed grinder consists of the feeding table, grinding chamber, rack, fan and discharge pipe. It is characterized by reasonable structure, convenient movement, safety and reliability.

More

9FQ-50 feed grinder

Feed grinder consists of the feeding table, grinding chamber, rack, fan and discharge pipe. It is characterized by reasonable structure, convenient movement, safety and reliability.

More

9FQ-60 feed grinder

This product is mainly used for grinding grains, dried sweet potatoes and crop straw. The product is of a full steel structure. The casing will not be destroyed by iron, stone or other sundries that enter into the machine accidently. In addition, it is assembled with the power mechanism, facilitating flowing processing.

More

9Z-15 silage cutter

This product is powered by motor (diesel engine or roller tractor). The power is conveyed to the main shaft. The driving V-belt on the other end of the main shaft transmits the sped-adjusted power to the straw pressing roller via triangle belt, clutch wheel, gearbox, universal joint and chain. When materials to be processed enter into the space between the upper straw pressing roller and the lower straw pressing roller, they will be clamped by the straw rollers and fed into the cutting mechanism at a certain speed, and then thrown out of the machine via the discharge port after being cut up by the revolving cutter holder at a high speed.

More

9Z-30 hay cutter

This product is powered by the main motor and feeding motor. The feeding motor transmits the speed-adjusted power to the grass pressing roller through the universal joint, gear box, transmission shaft, etc. When the material to be processed enters between the upper and lower grass pressing rollers through the conveyor chain, it is clamped by the grass pressing roller and fed into the cutting (kneading) mechanism at a certain speed. At the same time, the main motor transmits power to the main shaft through the triangle belt. The main shaft drives the cutter holder to rotate at high speed to shred (knead) the material and throw it out of the machine via the discharge port.

More

< 123 >

SEO This website supports IPV6

Business License

Contact Information

 

Address: 500 m west of the intersection of Huanghe Avenue and Longma Road, Chengguan Town, Mengjin District, Luoyang City, Henan Province
Service Hotline: 86-0379-67913226

Fax: +86-0379-67921908
Office: +86-0379-67917531
Technical Department: +86-0379-67922905

Mailbox:sdnjyxb@163.com

WeChat Consulting

WeChat Consulting

 

Mobile end

Mobile end