Webpage Copyright(c) Luoyang Sida Agricultural Machinery Co., Ltd. 豫ICP备14004971号-1
9RC-100 straw kneading machine \9RC-100TC straw kneading machine
【Working principle】
The motor is used as the supporting power. Power is transmitted to the main shaft, and the gear at the other end of the main shaft transmits the speed-adjusted power to the grass pressing roller through the gear box, universal joint, chain, etc. When the material to be processed enters between the upper and lower grass pressing rollers through the conveyor belt, After being clamped by the grass pressing roller and fed into the guillotine cutting mechanism at a certain speed, it is kneaded by a high-speed rotating kneading device, and then thrown out of the machine by the wind blade through the grass outlet.
【Scope of application】
9RC-100 straw kneading machine is suitable for kneading corn stalks, bean stalks, cotton stalks and other crop straws and pastures. Rubbing it into a neat incision, no knots, and a soft silk thread can improve the feeding rate, net eating rate and digestibility of livestock. The utility model is suitable for pastures and professional breeding households, and is also suitable for crushing papermaking raw materials in paper mills.
【technical parameter】
project | 9RC-100 straw kneading machine | ||
Supporting | Motor | Rated power (kW) | 18.5 |
power | Rated speed (r/min) | 1470 | |
Dimensions | Transport size: length × width × height (mm) | 1280 × 1070 ×1585 | |
Use size: length × width × height (mm) | 2430 × 2200 × 2756 | ||
Structure type | Guillotine | ||
Machine weight (㎏) | 580 | ||
Spindle rated speed (r/min) | 650 ( 1200) | ||
Productivity ( kg/h) | ≥6000 | ||
Rotor diameter (without hammer) (mm ) | 1000 | ||
Rotor width (mm ) | 305 | ||
Rotor working diameter (mm ) | 1000 | ||
Number of hammers | twenty four | ||
Feeding method | Automatic feeding | ||
Number of blades | 2 tablets | ||
Form of cutting machine (when applicable) | Cutter type | ||
Kneading mechanism form (when applicable) | Hammer type | ||
transfer method | Belt drive |
project | data | |
Productivity (cutting grass length 16mm, under continuous and uniform feeding conditions) | Green corn stalk (water content 78%) | ≥6t/h |
Dry corn stalks (water content 17%) | ≥2t/h | |
Dry straw (water content 17%) | ≥2t/h | |
Dry wheat straw (water content 17%) | ≥1.5 t/h | |
Dry alfalfa (water content 20%) | ≥2.5 t/h | |
Cutting length | 2 blades | 18,27,37,52(mm) |
Finished material blowing distance | 5~8(m) |